SACHS RCS 184 S2.6 Racing Clutch Disc 881864001953
Lightweight sintered metal clutch disc with 2.6 mm lining thickness for SACHS RCS 184 racing clutches
The SACHS RCS 184 S2.6 sintered metal clutch disc 881864001953 from ZF Motorsport is a high-quality driven plate for modular SACHS RCS 184 multi-plate racing clutches. It combines the 184 mm diameter with just 2.6 mm lining thickness and is designed for fast response, direct power transmission and a low moment of inertia in motorsport.
This version is aimed at applications where short, intensive load windows, fast rpm changes and precise engagement are the main priorities. Compared with S5.2 and S7.8 versions, the S2.6 offers less friction material reserve, but reacts particularly spontaneously and reduces the rotating mass in the clutch pack.
The 184 mm format provides a practical middle ground between the very compact RCS 140 and the large-format RCS 200. Compared with smaller 140 mm versions, the RCS 184 provides more friction surface and thermal reserve, while remaining more compact and more responsive than a 200 mm system.
The part number 881864001953 identifies the specifically selected version with the matching hub profile for the respective gearbox input shaft. The clutch disc is intended for use within SACHS RCS 184 clutch configurations approved by ZF Race Engineering.
Versions
Part No.: 881864001953
System: SACHS RCS 184 multi-plate racing clutch
Component: clutch disc / driven plate
Friction material: sintered metal friction lining
Lining thickness: 2.6 mm
Version: rigid clutch disc
Hub profile: vehicle- and gearbox-specific, matched to the gearbox input shaft
Note: The part number 881864001953 identifies the specifically selected SACHS RCS 184 S2.6 sintered metal clutch disc. Before installation, part number, hub profile, hub length version and approved RCS 184 clutch configuration must be checked against the existing vehicle and gearbox setup.
Benefits at a glance
184 mm size as a balance of agility and friction surface
2.6 mm version for low rotating mass and very fast response
Direct engagement behaviour for motorsport-style load changes
More thermal reserve than smaller 140 mm versions
More compact and more responsive than large-format 200 mm systems
Suitable for sprint use, qualifying and short intensive load phases
Vehicle-specific hub profile for the respective gearbox input shaft
Suitable for modular SACHS RCS 184 racing clutches from ZF Motorsport
Technology
Sintered metal 2.6 mm
The SACHS RCS 184 S2.6 sintered metal clutch disc 881864001953 is designed for fast response, direct power transmission and a low moment of inertia. The sintered friction lining supports very direct engagement behaviour and clear feedback in motorsport use.
The 2.6 mm lining thickness reduces the rotating mass in the clutch pack and promotes fast rpm changes. Compared with S5.2 and S7.8 versions, this variant places greater emphasis on agility; wear reserve and thermal capacity are deliberately designed for short, intensive application profiles.
The 184 mm diameter creates a practical combination of compact design, fast response and sufficient friction surface for high loads. This makes the S2.6 version suitable for vehicles where low inertia and durable power transmission are required together.
Hub profile
The hub profile of the SACHS RCS 184 S2.6 clutch disc 881864001953 is matched to the respective gearbox input shaft. This creates an accurate connection between clutch disc and gearbox, which is essential for clean power transmission and high operating reliability in motorsport.
When replacing a worn clutch disc, the existing hub length version of the SACHS RCS 184 clutch must be retained exactly. For new builds, conversions or individual assembly of an RCS 184 clutch pack, only the factory-approved hub length combinations for the respective clutch configuration may be used.
Before installation, the hub profile should be checked against the existing gearbox input shaft as well as the clutch cover, intermediate plates, pressure plate and approved RCS 184 configuration.
SACHS RCS 184 system
As part of the modular SACHS RCS 184 clutch system, the clutch disc is combined with approved pressure plates, intermediate plates and clutch covers. The decisive factors are the number of discs, lining thickness, installation height and the correct setup of the entire clutch pack.
The part number 881864001953 identifies the specific version of this SACHS RCS 184 S2.6 sintered metal clutch disc. For safe function, clutch disc, friction partners, clutch cover, pressure plate, intermediate plates and installation dimensions must be considered as a complete system.
Applications
CIRCUIT RACING / TOURING CARS
Super GT, ELMS,
DTM, STCC, NLS, TCR, GT World Challenge etc.
FORMULA
Formula Ford,
Formula 3, Formula 4 etc. (RCS115/140)
RALLY
GT2 European Series,
WRC, ELMS, DRM, BRC, FRC etc.
Description
PDF Documents
Manufacturer
